What to Do When Your Furnace Pilot Light Keeps Going Out

Having a pilot light on your furnace that can’t seem to stay lit is an issue that needs to be resolved as soon as possible. Imagine having to endure the cold winter while your furnace is out of commission! We’ve outlined a few steps to figure out how to stay warm while resolving the issue of your furnace pilot light going out.

Check Your Gas Pressure

The main issue of having a furnace pilot light that keeps going out is that the gas pressure can be off. Testing your gas pressure is the best way to determine whether or not this is the problem, and you can do it without having to call a technician. The gas pressure test ensures that the pressure is not to strong or too weak.

First, make sure the gas is turned off before you test your gas pressure otherwise you can put yourself in danger. Then, using a gas pressure tester, check the pressure until the needle is pointing to the correct number. The correct numbers can be found in the owner’s manual that came with your furnace. If the needle is off, resetting your pressure may do the trick.

Clean Your Pilot Light

You should take the time to clean your pilot light regularly. The pilot light may be littling sporadically due to dirt, dust, and grime gathering at the end of the pilot light. It’s recommended that you use a can of compressed air to clean the pilot light before relighting it.

To do this correctly, you want to make sure that all the power sources to your furnace, including the gas and the switch, are turned off. Then, put the can of compressed air nozzle directly in front of the pilot light, making sure not to bend the actual light, and spray the entire surface evenly. You may have to do this a few times, so keep going until you think the flint and spark igniter, where these two elements meet, is all cleared of the dirt.

Contact a Technician to Check for Gas Leaks

Still having issues with your pilot light? The problem could be more complicated than just dirt in your pilot light and could require the help of a professional furnace technician.

Our technicians can ensure that your entire furnace system is in tip-top shape, from the gas pressure to the gas components. We can also check for any gas leaks that may be occurring, which can be a common cause of a pilot light that won’t stay lit.

The point of having the technicians come out and run the tests is to find the exact cause of the issue. Without knowing the root of the problem, you’re just guessing and trying to fix the problem without success.

Conclusion

Having a furnace that won’t stay lit is a problem that nobody wants to deal with. However, the steps outlined above should be able to help you troubleshoot the problem or have a professional technician come out and assess the issue.

If you wish to read more information about Pilot light keeps going out, please visit AC Installation & Repair. And if you are in the San Diego area and need a reliable appliance repair, contact Local Reliable Appliance Repair at (866) 516-1222.

Pilot Light Keeps Going Out

There are a few different things that can cause pilot lights to keep going out, and it is important to take precautions to prevent this issue from occurring in the first place. The following is a list of recommendations from manufacturers and local HVAC technicians in San Diego to help prevent pilot light keeps going out issues:

• Check for leaks. Before starting any work on the appliance, check for gas or oil leaks around the appliance and the area in order to prevent potential fire hazards or other safety risks.

• Check for blockages. Check for blockages in the vent pipe, oranger spark plug or air filters on the appliance. Blockages can block the pilot light from receiving enough gas, preventing the pilot from staying lit.

• Clean and maintain the appliance. Properly clean and maintain the appliance according to the manufacturer’s directions. This can help to ensure that the appliance is functioning correctly and prevent any potential problems from arising.

• Check the thermocouple. The thermocouple is a safety device on the appliance that shuts off the gas to the appliance if the pilot light goes out suddenly. Make sure the thermocouple is working properly and check to make sure there is no corrosion, dirt or dust in the area that could be interfering with the device.

• Check the right connections. Make sure all connections and tubing are properly sealed and tightened. This helps to ensure that the pilot light receives enough gas and will stay lit.

• Replace the Pilot Light. If necessary, replace the pilot light itself if it is cracked, damaged or worn out.

Following these recommendations can help to prevent pilot light keeps going out issues and ensure that the appliance is running properly. If the issue persists, contact a professional appliance or HVAC technician for assistance.

Average Repair Cost for "Pilot light Keeps Going Out" Issue in San Diego

Having a pilot light that keeps going out can be a big hassle and a difficult problem to resolve. Luckily, there is often an easy solution, but the cost of repairs and replacement parts can be a big factor. This guide will provide the minimum repair or installation cost, the complex repair or installation price, the most commonly replaced parts and the cost of labor in San Diego.

For the minimum cost of repair or installation, expect to pay anywhere between $50 to $150. If the problem is more complex and requires a professional contractor, the cost can range from $150 to $400.

The most commonly replaced parts for pilot light problems include thermocouples, thermopiles, gas valves, wiring and pilot generators. Labor cost will vary, but expect to pay around $50 to $100 per hour for a certified technician. Materials cost can range from $15 to $100.

For the most reliable and cost-effective solution to this problem, call Local Reliable Appliance Repair at (866) 516-1222. They specialize in furnace repair in the San Diego area, and can help diagnose and remedy the issue quickly.

Pilot Light Keeps Going Out? Don't Panic!

Having problems with your pilot light that keeps going out? Don't panic, help is available. Consider Reliable Appliance Repair for a reliable and quick fix. This local San Diego HVAC and appliance repair family-owned local company offers same-day service for appliance and HVAC repair and installations. With highly trained technicians that have a minimum of 5 years experience in the field, you know your pilot light will stay on with their help. Not only that, but they offer fair and affordable pricing as well as being licensed and insured. As a first-time customer, you can even get $25 off labor.

Don't hesitate to contact Reliable Appliance Repair at (866) 516-1222 when you have a pilot light that keeps going out. They have the skills to keep it lit and have the price to keep your wallet full. So don't wait, call Reliable Appliance Repair now and get the friendly and efficient service that you need.

FAQs – What To Do When Your Furnace Pilot Light Keeps Going Out?

What is the Furnace Pilot Light?

The pilot light is a small flame that ignites the gas used in a furnace. It is usually situated at the base of the unit where the gas is ignited.

What Causes the Pilot Light to Keep Going Out?

Several common issues can cause a furnace pilot light to malfunction. These include a misplaced thermocouple, dirt buildup, a faulty thermocouple, and a low gas supply.

How Can You Tell if There Is Dirt Buildup?

You may suspect dirt buildup if the pilot light behaves erratically, flickers or requires frequent relighting.

How Can You Troubleshoot the Pilot Light?

Ensure the thermostat is set correctly and the pilot light flame size is adjusted appropriately. Reset the circuit breaker or check the fuse switch. Check the thermocouple for signs of wear. Clean the pilot light orifice. Move the thermocouple away from the flame to ensure it is not too close.

What If the Problem Persists?

If these simple troubleshooting techniques do not resolve the issue, it is best to contact a qualified professional for assistance.

If your furnace pilot light keeps going out, it is important to address the issue quickly. For the best advice and assistance, contact Local Reliable Appliance Repair at (866) 516-1222.