Reliable HVAC & Appliance Repair (866) 516-1222

Licensed HVAC & Appliance repair expert service

Test

Troubleshooting tips: How to fix a refrigerator that’s not cooling

Troubleshooting Tips: How to Fix a Refrigerator That's Not Cooling

A refrigerator is an important home appliance that helps keep food fresh and edible for longer. So when a refrigerator begins to malfunction, it can be a concerning issue for home-owners. Refrigerator not cooling is a common problem that can range from an easy fix to a more time-consuming and expensive repair.

Common Causes of a Refrigerator Not Cooling

Compressor not working: A malfunctioning or dead compressor is one of the most common reasons a refrigerator will not up to temperature correctly. The compressor is responsible for pushing coolant through the refrigerator to create coldness. A broken compressor can cause temperatures inside the fridge to stay warm, or not reach the correct temperature. Testing the compressor is the first step in diagnosing the problem.

Improper Coolant Level: Low coolant levels can also be the source of a refrigerator not cooling correctly. The coils inside a refrigerator demand adequate refrigerant fluid to remain cool. If the levels are too low, the coolant will not stay cold and as a result, the refrigerator will not reach the desired temperature. Refilling the coolant levels may be all that is necessary to get the refrigerator to cool properly again.

Dirty Condenser Coils: Condensation coils are located behind or underneath a refrigerator and help in cooling the interior. Over time, dirt and debris can collect on the coils, making them unable to properly cool. Simply clean the coils with a brush or vacuum to remove the buildup. A yearly checkup is recommended to ensure the coils remain clean year round.

Troubleshooting Tips

Check Voltage: The first step in diagnosing any refrigerator problem, is to check and see if the refrigerator is receiving power. Fridges require a certain voltage to function and operate properly. If the voltage is too low, it may cause the refrigerator to not reach temperature. Checking and ensuring the voltage is sufficient is a good starting point.

Check Thermostat Settings: Checking the thermostat settings is another easy check that can be done quickly and may help to resolve the problem. Many refrigerators will have a dial or digital setting, allowing the user to change the temperature. Double-check that the settings are correct and accurate, this will help to determine whether or not the problem can be resolved simply by adjusting the temperature setting.

Check Door Seals: If the door seals are compromised or damaged, it is impossible for a refrigerator to remain cold. Properly sealing the door is essential to maintaining low temperatures. Check the seals and make sure they are intact, if not, the door may need to be replaced.

Conclusion

If you are experiencing issues with your refrigerator and it is not cooling correctly, then you have multiple steps at your disposal to troubleshoot the issue. From checking thermostat settings to testing the compressor, to making sure the door seals are intact, there are simple ways to fix a refrigerator that is not cooling correctly.
If you wish to read more information about Refrigerator not cooling you can click here. For more help regarding repairing your refrigerator, you can contact your local reliable appliance repair at (866) 516-1222.

Troubleshooting tips: How to fix a refrigerator that's not cooling
Troubleshooting tips: How to fix a refrigerator that's not cooling
Troubleshooting tips: How to fix a refrigerator that's not cooling

Refrigerator Not Cooling: Best Practices and Solutions

Having a refrigerator that does not cool can be a major inconvenience. While there are a few potential causes for this issue, manufacturer or local appliance and HVAC technician recommendations offer the best preventive action to avoid refrigerator not cooling issues.

Here is a list of manufacturer recommendations and best practices that may help to prevent refrigerator not cooling issues:

  1. Adjust temperature settings: the desired temperature settings should be adjusted according to the manufacturer's instructions. On average, the recommended refrigerator temperature settings range between 36 to 40 degrees Fahrenheit and 0 to 4 degrees Fahrenheit for the freezer.

  2. Keep doors closed: this ensures that cold air is not lost when accessing items. It also helps to maintain an ideal temperature and avoid fluctuations in temperature that can cause food spoilage.

  3. Maintain clean door seals: fiddly seals around the door help to keep cold air in and guarantee proper temperature upkeep. Clean the door seals regularly with a soapy solution and a soft cloth, making sure to keep them free from debris and dirt.

  4. Check condenser coils: condenser coils help the refrigerator run efficiently. If these coils become dirty, the appliance may not cool down, leading to an accumulation of heat in the fridge. Once a year, vacuum these coils to keep dust and dirt at bay.

  5. Avoid overloading: an overfilled refrigerator can be bad for temperature control. Make sure the refrigerator is not too full as this may impede air circulation, preventing the appliance from cooling properly.

If the manufacturer or local HVAC technician recommendations cannot prevent a refrigerator from not cooling, it is advisable to contact a reliable appliance repair service for further assistance. Full service repair, maintenance, and replacement might be required to restore the performance of the appliance. In San Diego, Local Reliable Appliance Repair is the go-to service for this kind of job – to get in touch, call (866) 516-1222.

Average Repair Cost for "Refrigerator Not Cooling" in San Diego

If your refrigerator has stopped cooling, it's important to call for professional appliance repair. The repair cost for this issue in San Diego will differ depending on the parts involved and the complexity of the job. However, minimum repair or installation cost will start from around $140 and can go up to $600 for more complicated repairs.

Damaged parts that may need to be replaced include the fan motor, compressor, temperature sensor, and defrost timer. Depending on the model, you may need to get additional parts and components as well. The cost of these parts and materials will be taken into consideration when the technician arrives at your home to evaluate the issue.

For reliable, cost-effective appliance repair in San Diego, call the experts at Local Reliable Appliance Repair. They are renowned for their excellent service and fair prices. The technicians have the right expertise and knowledge to fix your refrigerator quickly and cost-effectively.

Refrigerator Not Cooling? Contact Reliable Appliance Repair for Help!

Is your refrigerator not cooling properly? Don't fret, but do make sure to contact local Reliable Appliance Repair. This family-owned local company in San Diego specializes in HVAC and appliance repair.

Reliable's professional technicians have a minimum of 5 years experience in the field. With all the in-depth knowledge and expertise about refrigerators, these professionals can fix any cooling issue in no time!

Not only do they have a great team of experienced, certified professionals, but their services are also affordable. Locals in San Diego never have to worry about straining their budget when they call Reliable Appliance Repair.

Plus, Reliable provides same-day services to all their customers. No matter when problems arise, help is always just one call away.

At Reliable, customers can be sure they'll always get the best services in town. From honest, reliable work to the fairest prices, there's simply no beating Reliable Appliance Repair.

So don't wait any longer to get those refrigerators fixed. Get in touch with Reliable Appliance Repair to get the best services in town. Call (866) 516-1222 today and get your refrigerator running smoothly!

FAQ: Troubleshooting Tips to Fix a Refrigerator That's Not Cooling

Q: How Do I Know My Fridge is Not Cooling?

The most common symptom of a fridge that's not cooling is a rising internal temperature. Take the time to place a thermometer inside; if the temperature exceeds 50°F, it's time to investigate possible causes and get it repaired.

Q: What Should I Check First?

First, check to make sure the fridge is plugged in correctly and that all necessary vents are clear of debris. Next, check the thermostat setting and ensure it's not too high for the current room temperature—moderate settings are usually the most energy efficient.

Q: What If These Steps Do Not Help?

If the issue persists, check the condenser coils, drain pan, and fan blades for clogs or dirt. Also, inspect the door seals for any damage or gaps, as this can lead to warm air entering and bypassing the cooling system.

Q: Should I Call a Repair Person?

If physical inspection and basic troubleshooting do not improve the cooling of your fridge, it's time to contact a professional appliance repair service. Local Reliable Appliance Repair can help get your refrigerator up and running again quickly and efficiently. Call (866) 516-1222 for more information.