How to Fix a Washing Machine Drum That Won't Turn
When you put a load of laundry into your washing machine, you expect the drum to turn so your clothes get clean. But when it stops, it can be a huge time-consuming hassle. You may have already heard that the cause is one of the following: damaged belt, burned out motor, defective switch, faulty timer, or blocked pipes. Before you call a professional, you can troubleshoot the issue to see if you can fix it yourself.
Check the Belt
A damaged, stretched, or missing belt can cause a washing machine drum to stop spinning. A belt is usually located just below the tub seal. To check it, unplug your washing machine and remove the back cover. Locate where the belt should normally be and inspect for damage. If it looks in good condition, check to ensure that it is kept tight. If the belt is stretched, cracked, or missing, you will need to have it replaced.
Check the Motor
The motor is responsible for turning the drum. If the motor is burned out, the drum won't turn. To check, you will likely need to get access to the motor by removing the back cover of your washing machine. Check for a broken wire, then place a multimeter on the pins of the motor and use the Ohms selector on the multimeter to measure the resistance. If the resistance is zero, then the motor is burned out. If not zero, the motor should still be spinning.
Check the Switch
The drum spins when it gets signals from the switch. To check this, turn the washing machine on and off at the breaker. Put your hands around the switch and see if it vibrates. If it vibrates, this means that the switch is working and the issue is something else. If it doesn't vibrate at all, then the switch is not working and needs to be replaced.
Check the Timer
The timer on a washing machine tells the motor when to turn the drum and when to stop. You can check it with a multimeter. Unplug the washing machine and locate the timer. With the multimeter, check to ensure the timer is receiving 12V of power. If the timer isn't working, it probably needs to be replaced.
Check the Pipes
If the water pipes connected to your washing machine are blocked, the drum may not turn. This is because the water pressure is not strong enough to push the drum. Check the pipes to make sure there is no buildup of dirt or debris blocking the flow. If there is debris, remove it and try your laundry again.
If you have tried all of the troubleshooting tips above but your washing machine drum hasn't started turning, it is time to call a reliable appliance repair technician. They will be able to diagnose the problem and get you the best washing machine repair in San Diego. Local Reliable Appliance Repair can help you with all of your washing machine needs at (866) 516-1222.
If you wish to read more information about washing machine drum not turning click here.
Steps to Prevent Washing Machine Drum Not Turning Issues
If you're looking for ways to avoid issues with your washing machine drum not turning, consider taking the following preventive actions:
-
Regular Cleaning: Regular cleaning and maintenance of your washing machine can help reduce the likelihood of a drum not turning issue. Clean the inside of the drum and the outside of the machine with a mild detergent. Don’t forget to regularly clean the filter and drain trap.
-
Check For Obstructions: Make sure that your washing machine drum isn’t obstructed by any extra fabric or items. When checking for obstructions, remember to look for anything unusual that might be blocking the drum. Even a tiny piece of fabric can cause the drum to not turn.
-
Level the Machine: Make sure that the washing machine is properly leveled to avoid any issues with the drum not turning. Use a leveler or a bubble level to check whether the machine is balanced.
-
Regular Inspections: If you don’t feel comfortable performing some of the maintenance and cleaning tasks mentioned above, call a local appliance repair technician. A professional technician can conduct a thorough inspection of the washing machine to ensure that everything is working properly and to help avoid issues with the drum not turning.
-
Call an Expert: If you suspect that there might be an issue with the drum not turning, don’t try to fix it on your own. Contact a reliable appliance repair technician to diagnose the issue and provide a solution.
By following the advice above, you can help ensure that your washing machine runs properly and that its drum will be spinning without any issues. It’s also important to keep in mind that even when you take the necessary preventive measures, it’s possible that you may still experience some issues. If that’s the case, contact a local appliance repair technician for help.
For reliable and experienced appliance repair services in San Diego, contact Local Reliable Appliance Repair at tel:(866) 516-1222.
Advice for the Average Repair Cost on Washing Machine Drum Not Turning in San Diego
The average repair cost when a washing machine's drum is not turning in San Diego can range between the minimum repair cost of $45 and the complicated repair cost of up to $400. Parts such as motor couplers, drive belts, motor switches, clutch assemblies, and main control boards could be necessary, so it is best to call a local and reliable appliance repair technician.
Labor costs will typically be higher, costing up to $150-$200 depending on the additional materials needed, details required, and the complexity of repair. It is important to note that any materials needed will, of course, contribute to the cost; however, it is likely the labor cost will reflect most of the costs.
For the best professional advice and to receive a detailed itemized list of parts needed, as well as an accurate cost for the repair, contact Local Reliable Appliance Repair at tel:(866) 516-1222 or visit the Washing Machine Repair in San Diego page for more information.
Solving the Problem of a Washing Machine Drum Not Turning
Few things are more frustrating than when your washing machine drum stops turning. Fortunately, for those located in San Diego, CA, there is a local family-owned solution – Reliable HVAC and Appliance Repair.
Reliable is highly experienced and provides same-day service when it comes to HVAC and appliance repair and installations. And as a first-time customer, you can receive $25 off labor. All technicians have a minimum of five years of experience in the field, ensuring that your washing machine drum is repaired in an efficient manner.
Also, Reliable is licensed and insured, offering competitive prices and convenient service. If you find yourself struggling with a washing machine drum not turning, don't wait – contact the friendly staff at Reliable Appliance Repair right away. You can reach them at: tel:(866) 516-1222.
No matter your HVAC or appliance repair needs, Reliable is here to help. They provide honest and reliable service, ensuring that you receive top-notch repair and are satisfied with the results. With same-day service options and cost-efficient prices, there's no better option in San Diego. So, when you need help with a washing machine drum not turning, look no further than Reliable.
FAQ – How to Fix a Washing Machine Drum That Won't Turn
What causes a washing machine to stop spinning?
A washing machine drum can stop turning due to an unbalanced load, a faulty drive belt, or a malfunctioning motor.
How can I troubleshoot my washing machine?
Check to make sure the machine is level, the load is evenly distributed, and no items are blocking the drum. If that isn't the problem, unplug the machine and inspect the drive belt for wear and tear or breakage. If the belt is fine, check the motor for any issues.
Can I repair my washing machine myself?
In some cases, it is possible to repair the washing machine yourself, but it is best to remain cautious. If you are unfamiliar with washing machine parts, or if the damage is more complex than a faulty drive belt or motor, it is best to contact a professional.
Is it worth repairing my washing machine?
Before considering repair, it is a good idea to determine if the cost of the repair will be worth it. Fixing a washing machine with a broken drum can cost hundreds of dollars. If the cost of the repair exceeds the cost of a new machine, a new washing machine can be a better option.
If you are having any problems with your washing machine, it is best to contact a local, trusted appliance repair professional. They can inspect and diagnose the issue and advise the best action.
For expert advice and help with washing machines, call Local Reliable Appliance Repair at (866) 516-1222.