Troubleshooting a GE Dryer That Won't Turn On

When your GE dryer fails to turn on, you want to find the answer quickly so you can get back to the business of doing laundry. However, the solution is not always simple, especially if you don't know what is causing the problem. Fortunately, there are a few troubleshooting steps you can take to try and diagnose the issue before you have to call for professional help.

1. Check Electrical Connections

The first thing you should do is to make sure all the electrical connections are up to date. Unplug your dryer from the wall, check all the cord ends, and then plug it back in to make sure the connections are still tight. If they are loose, you want to make sure you tighten them.

If the cords appear to be okay, there might be other issues. Check the power outlet to make sure it's receiving power and check your breaker box to make sure it was not tripped. You can do this by turning the breaker off and on or resetting the GFCI if necessary.

2. Clean the Lint Filter

If the power is okay and the dryer still won't turn on, your lint filter could be the culprit. Often times, the lint screen gets clogged with materials from the laundry cycle, preventing air flow and causing the dryer to overheat. If this happens, the dryer shuts off to avoid any damage.

To fix this, unplug the dryer, pull out the lint filter, and clear the lint tray of the screen. The lint tray can be cleaned with a small vacuum or soft bristled brush. After the lint is cleared, check the rear of the lint filter for any obstructions and clean any dust or lint accumulated.

3. Check the Dryer Door

If the power is okay and the lint filter is clean, move on to the front of the dryer. Close the door and then press the door switch with your finger. Your finger should push down the switch and you should be able to hear it click. If the switch does not click, then you may have a bad door switch. If that's the case, you'll need to call a professional to change the switch out. If the switch clicks, make sure the door is closing all the way and that there are no items obstructing the door.

4. Check the Start Switch

In some instances, the start switch may not be working. This switch is usually located in the bottom right-hand corner of the dryer. Check it to make sure that it is being depressed when the start button is being pressed. If it isn't, the switch may need to be replaced.

Another issue can stem from the drum belt. If the belt is off track the dryer won't start. To fix this, you'll need to open the dryer's top and sides and inspect the belt for any worn or damaged areas.

5. Inspect the Thermal Fuse

Your dryer should also have a thermal fuse that can blow if it overheats. If the thermal fuse blows, the dryer will not turn on. To check this, open up the dryer cabinet and locate the thermal fuse, then use an ohm meter to check it.

If the thermal fuse is not functioning, you should replace the thermal fuse with a new one. But keep in mind, the thermal fuse should only be used as a one-time repair. If the thermal fuse continues to blow, the dryer will require professional service to help diagnose the underlying problem.

Before you call a professional, however, check for any lint buildup in the exhaust vent. If the vent is blocked, the dryer will overheat and the thermal fuse will blow.

Conclusion

When your GE dryer won't turn on, it can be difficult to diagnose the issue. But if you follow the outlined steps here and take the time to troubleshoot the dryer, you'll be able to find the root of the problem. And if these steps don't solve the issue, you should consider calling a professional.

If you wish to read more information about GE dryer not turning on, please visit this website. And if you need professional help, you can call Local Reliable Appliance Repair at (866) 516-1222 or visit the website https://reliableappliancesrepair.com/dryer/san-diego/92111/dryer-repairs-in-san-diego.html.

GE Dryer Not Turning On: What To Do?

Taking preventive action to avoid GE dryer not turning on issues is essential for all San Diego residents. Here are some manufacturer recommendations and local appliance or HVAC technician's recommendations to consider:

• Check the Circuit Breaker and Voltage – Ensure the GE dryer has a strong power supply by making sure the circuit breaker is working properly and the voltage coming from the outlet matches the voltage on the dryer.

• Check the Door Sensor – The dryer will not turn on if the door isn't completely closed as the door sensor won't detect the lock and keep the motor from running.

• Check the Thermal Fuse – If the thermal fuse has blown, the dryer will not turn on at all. To check, head to the rear of the dryer and locate the fuse as it is usually attached near the exhaust.

• Check the Start Switch – The start switch activates and deactivates the dryer’s motor when you press the start button. If the switch isn't working, the dryer will not turn on.

• Get Professional Help – If none of the above fixes the issue, call a professional for help.   A reliable appliance repair company like Local Reliable Appliance Repair can provide valuable knowledge and insight into any issues related to the dryer.

By following these recommendations and taking a few precautionary measures, San Diego residents can drastically reduce the chance of a GE dryer not turning on.

Average Repair Cost for a GE Dryer that won't Turn On

Dryer repair in San Diego can be costly, yielding a minimum cost of repair or installation of around $150, with the more complex repairs or installations starting at $250. What parts may be necessary to repair the dryer?

The most commonly replaced parts include the timer, motor, thermostat, heating element, cycling thermostat, and door switch. The cost for these parts varies, ranging from $25 – $250. For example, a cycling thermostat typically costs around $50, while a heater element is closer to $150 – $200.

Labor, or the cost of the repair man, typically starts at $80, depending on the complexity of the job and the company you're hiring. Additionally, some companies charge a fee for materials and other supplies.

For the best professional advice on GE dryer repair in San Diego, we recommend calling Local Reliable Appliance Repair at (866) 516-1222. With the right parts and expertise, you can have your dryer back in service in no time.

Why You Should Contact Reliable Appliance Repair for Your GE Dryer Not Turning On

Having a GE dryer not turning on can be a frustrating and costly experience. Fortunately, Reliable Appliance Repair is here to help. As a local San Diego HVAC and appliance repair family-owned business, they offer same-day service for appliance and HVAC repair and installations and are conveniently located.

Reliable Appliance Repair’s techs have a minimum of 5 years experience in the field, are all highly trained and certified, and have a wealth of knowledge to draw from when it comes to fixing and servicing appliances of all makes and models. They specialize in GE dryer not turning on, and offer fair and competitive prices, and as a first-time customer you can get $25 off labor. Plus, the company is fully licensed and insured for your protection.

For GE dryer not turning on, don’t hesitate to contact Reliable Appliance Repair today. With their stellar 5-star reviews, same-day service, and highly experienced technicians, the experienced professionals can provide you with the top-notch quality service your GE dryer needs, so you can get back to doing laundry in no time. To learn more, be sure to call (866) 516-1222 or fill out their contact form today.

FAQs To Troubleshoot When GE Dryer Won't Turn On

Q: What causes GE dryer not to turn on?

A: Possible causes for a GE dryer not turning on can include an incorrect thermostat setting, power outage, damaged fuse, disconnected power cord, defective motor switch, blown thermal fuse and faulty timer.

Q: What should I do if my GE dryer won't turn on?

A: First, refer to your user manual. Check the breaker to see if it’s tripped, which could easily happen if the dryer gets overloaded. Next, ensure the power cord is connected and check the fuse box for any tripped fuses or blown thermal switches.

Q: How can I tell if my dryer's motor is working?

A: You can check the dryer's motor by removing the back panel of the appliance and inspecting the motor and motor wiring. If you don't understand the wiring diagrams and motor functions, then contact a professional appliance technician.

Q: How can I troubleshoot a faulty timer in my dryer?

A: To troubleshoot a faulty timer, first remove the back panel and check for any signs of damage or corrosion. If the timer is broken, it may need to be replaced. If unsure, consider calling a professional repair technician or consulting the user manual.

Q: What should I do if my dryer's thermal fuse has blown?

A: If your dryer's thermal fuse has blown, you should replace it with a new fuse, as they must be replaced to restore appliance functionality. Additionally, to prevent this issue in the future, you should check and clean your dryer’s lint trap prior to each use.

If you are unable to solve this issue on your own, please consider talking to a Local Reliable Appliance Repair technician at tel:(866) 516-1222.