How to Fix a Stove Igniter That Won't Light
Chances are good that if you own a stove, a stove igniter has been used during the course of its use. A stove igniter works like a spark plug. When the Gas in the stove is ignited, it looks like a spark. But when it doesn’t spark, it is time to diagnose the problem and apply a fix. In this article, we’ll address the most common causes of a sparking stove igniter, and offer advice on the steps to take to fix it.
Diagnosing the Problem
The first step in fixing the stove igniter is to determine why it is not sparking in the first place. If the stove igniter does not spark, your gas stove can’t be lit. The troubleshooting process involves a few simple tasks.
Check the Igniter
The most common cause of an igniter not sparking is a weak or faulty igniter. An igniter is an inexpensive component that can be easily tested. When they wear out they often stop sparking or click erratically. If your igniter appears to be weak, faulty, or clicking erratically, you should replace it with a new, high quality part.
Check the Gas Valve
Another possibility is that the gas valve isn’t functioning properly. This can be easily tested with a multimeter. If the valve isn’t opening, then the gas won’t flow to the burner. To replace a valve, it's best to call a Local Reliable Appliance Repair service who will quickly diagnose and repair your stove gas ignition problem.
Check for Leaks
A third possible reason for your igniter not working is a gas leak in the stove. Inspect the gas connectors and the sealant on the burner and make sure the gasket on the door of the oven is tight. If you suspect a leak, replace the seals or hire a professional to help you detect and repair the issue.
Solutions to Fix the Problem
Once you have determined why your igniter isn't sparking, you can take the steps necessary to fix the problem. Start by turning off the gas and unplugging the stove. Then, you can begin making the necessary repairs.
Replacing an Igniter
To replace an igniter, begin by turning off the power and unplugging the stove. Carefully inspect the igniter for signs of corrosion and wear. If there are signs of wear, it’s time to replace the igniter and you should get a new one from a reputable dealer and install it according to the manufacturer’s directions.
Replacing a Gas Stove Valve
If the gas valve is not functioning, first identify the part’s model number and then purchase the correct replacement valve. With the power off and the stove unplugged, disconnect the old valve and replace it with a new one. Make sure to securely fasten the valve to the wall and properly connect it to the stove.
Replacing Locking Mechanisms
The last step is to replace any of the locking mechanism to the oven which may have been damaged or overused. If any of the locks are broken, replace them with the appropriate lock for your oven model.
Conclusion
Fixing a stove igniter that won't light is not a daunting task, but it can be time consuming. However, as long as you have the necessary tools and supplies, it shouldn't be too difficult to complete. With the help of this article, you can now troubleshoot and fix the most common causes of a faulty stove igniter.
If you wish to read more information about Stove Igniter Repair, please contact your Local Reliable Appliance Repair at (866) 516-1222 and ask an experienced technician to inspect and repair your stove.
Stove Igniter Repair: A Prevention Guide
Preventive maintenance is essential for avoiding stove igniter repair issues. Here are some manufacturer recommendations and local appliance or HVAC technician’s recommendations for preventive action:
- Inspect igniter connections regularly.
Check igniter connections at least once a month to make sure that they are secure. If any wires or other connections appear loose, tighten them and make sure the connections are secure.
- Maintain proper clearances around the stove.
Ensure that all combustible materials, such as paper towels and plastic items, are kept well away from the stove and its potentially hot elements.
- Use separate circuits for the stove.
Wiring the stove separately from other large kitchen appliances reduces the chances of an overload on any individual circuit.
- Vacuum the back of the stove.
Vacuuming the back of the stove regularly helps to remove dust, lint, and other debris that can accumulate and interfere with the normal operation of the igniter.
- Keep the oven door and vents clean.
Clean the oven door and vents regularly to keep them free from debris and buildup. This prevents debris from entering the oven when it is in use, and can reduce the amount of work the igniter has to do.
- Check the igniter regularly.
If your oven has a visible igniter, it should be checked regularly for signs of wear. If it appears worn, cracked, or otherwise damaged, it should be replaced by a qualified appliance repair technician.
- Schedule regular maintenance checks.
Have a qualified appliance repair technician inspect your stove periodically for signs of damage, wear, or potential problems. This will help to ensure that all parts are in proper working order.
Following these tips and recommendations will help to ensure that your stove igniter is in good working condition and that repairs are not necessary. If you have any questions or concerns, contact a reliable local appliance or HVAC technician for further assistance.
Repair Cost for Stove Igniter Repair in San Diego
Having issues with your stove igniter can be frustrating and expensive. Repair or installation of a new igniter can vary widely depending on the model and condition of the current igniter. The best professional advice we can give is to call Local Reliable Appliance Repair in San Diego to get an accurate estimate.
The minimum cost of stove igniter repair/installation in San Diego is around $65, while complex repairs can cost as much as $250 or more. This price includes labor and materials. Regardless of the repair cost, it's always better to call a reliable technician to inspect the issue in more detail and determine the best course of action.
Below is a list of the most commonly replaced stove igniter parts and their associated costs:
* Igniter – Prices range from $20 to $50.
* Wiring Harness – Prices range from $20 to $40.
* Igniter Shaft – Prices range from $7 to $15.
* Burner Head – Prices range from $15 to $30.
These parts will likely be necessary for any repair, although other parts may be required depending on the make and model of the stove. It's important to entrust your repair to professionals who can provide excellent service for an accurate assessment and a flawless repair.
For more information on stove igniter repair in San Diego, please contact Local Reliable Appliance Repair for the best professional advice.
Get Great Results with Stove Igniter Repair
When it comes to stove igniter repair, you need a reliable contractor that can provide fast and efficient service. With Reliable HVAC and Appliance Repair, you'll get great results each and every time. A family-owned local business in San Diego, Reliable offers same-day service and installation on all appliance and HVAC repair projects.
You can trust the friendly and professional technicians at Reliable; all of them have at least five years of experience in the field. So you can be certain you're getting the best workmanship and fair pricing. As a special offer for first-time customers, Reliable HVAC and Appliance Repair is offering a $25 discount on labor.
Reliable HVAC and Appliance Repair is fully licensed and insured, and they make sure each job is done right the first time. Get your stove igniter repair taken care of quickly and effectively with this San Diego-based company. Contact Reliable HVAC and Appliance Repair at (866) 516-1222 for your free estimate today!
FAQ – How to Fix a Stove Igniter That Won't Light and Stove Igniter Repair
What is an igniter?
An igniter is a small electric device inside a stove that provides the spark that is necessary for the stove to light up.
What are the common problems with an igniter?
The most common problem with an igniter is that it can stop sparking, making the stove unable to light. This can be caused by a short circuit, a bad spark electrode, or a faulty wire connection.
How can I test an igniter?
First, make sure the stove is unplugged and all of the gas lines are closed. Once this is done, use a multimeter or test light to check the voltage of the igniter. If you see a voltage reading, then the igniter is working.
What can I do if the igniter is not sparking?
If the igniter does not reach the correct voltage, there are a few things that could be causing the problem. Check to make sure all of the wires are connected securely, and if not, reconnect them. If that does not solve the problem, check the spark electrode to make sure it is clean and not corroded. If the spark electrode is corroded, replace it with a new one.
What if I cannot fix the igniter myself?
If you are unable to fix the igniter, it is best to call a Local Reliable Appliance Repair professional. It is important to trust a professional to make sure the job is done right. Call Local Reliable Appliance Repair at (866) 516-1222 to help you with your stove igniter repair.