# AC Fan Running But Not Cooling? Here’s What To Do
When your air conditioner isn’t working properly and the fan is running yet the air is not being cooled, it can start to feel like you are living in a sauna. It’s even worse in hot and humid climates where indoor temperatures can become unbearable. To make matters worse, the energy bills can skyrocket if your AC isn’t running correctly. Though it can be pricey, it’s important to have a professional come to your home to diagnose and repair the issue. To help you understand more, we’ve broken down the most common causes of AC fan running but not cooling.
## 1. Improper AC Installation
A common issue that could cause your AC fan to be running yet it isn’t cooling is improper installation. Unfortunately, if your AC system was not installed correctly it’s likely that you’re going to be facing an expensive repair. This can happen for a variety of reasons. For example, the wrong size AC unit was installed or the wrong capacity was purchased. Also, the person responsible for the installation may have done a few of the steps incorrectly or faulty wiring was used.
## 2. Low Refrigerant Level
Your air conditioner utilizes a liquid refrigerant to cool your home. The refrigerant is circulated between your AC unit and a pad/furnace unit located outside of your home. If the level of refrigerant is low, then your AC unit will run but it won’t cool. This is a common issue and can happen due to a refrigerant leak or because the unit was undercharged when it was originally installed. The only way to fix the issue is to have a professional come to your home and check the level of refrigerant.
## 3. Leaking Ductwork
Your ductwork is the system of vents and ducts that run throughout your home. The primary purpose of ductwork is to carry cooled air from the AC unit to each room. If your ductwork is leaking, then your AC fan will be running however there won’t be enough cooled air to effectively cool your home. It’s important to have a professional come to inspect your ductwork so they can identify any leaks and repair them.
## 4. Clogged Air Filter
The air filter located in your AC unit helps collect dirt, dust, and other pollutants so they don’t end up in your indoor air. If the filter isn’t changed regularly, then it can become clogged. When that happens, it restricts the airflow which reduces efficiency and can cause the unit to not cool properly. To fix the issue, it’s best to have a professional come to your home and change the filter.
## 5. Faulty Thermostat
The thermostat is the device that allows you to control the temperature in your home. If the thermostat is faulty, then it could cause your AC unit to not cool your home properly. This could be due to a bad connection, a faulty switch, or the unit may need to be recalibrated. To make sure your thermostat is working properly, it’s a good idea to have a professional come to your home and diagnose the issue.
## 6. Improper Airflow
If your AC unit is not getting enough airflow, then it can cause it to not cool properly. This can happen due to a number of different issues such as a dirty evaporator coil, a blocked condenser coil, or the fan motor may be faulty. It’s important to have a professional inspect the issue and make sure that the system is getting the adequate airflow it needs.
## 7. Damaged Compressor
The compressor is the part of your AC system that is responsible for compressing the refrigerant so it can cool your home. If the compressor is damaged, then it can cause your AC unit to run but not cool your home. This is a serious issue so it’s important to have a professional come to your home and repair the issue.
## Conclusion
If your AC fan is running but not cooling your home, then it could be a sign of a serious problem. It’s important to have a professional come to your home and diagnose the issue so they can determine the best course of action. If you find yourself in this situation don’t hesitate to contact your local AC repair specialist. If you wish to read more information about AC fan running but not cooling please [click here](https://www.ac-installation-repair.com/category/air-conditioner-repair/?s=internal) to find out more and if you live in San Diego, definitely call Local Reliable Appliance Repair at (866) 516-1222 for the best service.
Preventive Measures to Avoid AC Fan Running but Not Cooling Issues
Regularly checking the unit for optimal performance is key to avoiding AC fan running but not cooling issues. Below are some simple preventive steps that will help you ensure your cooling system is in top working condition:
Clean the Unit
Make sure the unit is clean and free from dust, dirt and debris to ensure the fan is not obstructed. Check for any clogging issues which could be caused by pet fur or any oxidation build-ups on the fan blades.
Check the Filters
Check and replace the AC filter regularly as well as any carbon monoxide detectors. This will help prevent air flow obstruction. If the filters get blocked, it increases the levels of dust, pollen, and pet fur in the air, which can lead to clogging and thus AC fan running but not cooling issues.
Power Supply
Inspect the power supply to ensure it is functioning correctly. If there is a power supply issue, it could prevent the fan from running and reduce the amount of cooling.
Inspect for Leaks
Check for any leaks or blockages in the ductwork. Properly sealed ductwork is important for improved performance. If there are any leaks or blockages, it can reduce air flow and lead to AC fan running but not cooling issues.
Inspect Vents and Registers
Check all of the vents and registers to make sure they are open and free of obstructions. This will help provide the AC with proper air flow and prevent the fan from running but not cooling.
Contact an HVAC Technician
If the above preventive steps are followed and the issue persists, it is best to call a local reliable appliance repair specialist. The technician is experienced with AC services and will be able to diagnose and fix any potential malfunctioning components. Contact Local Reliable Appliance Repair at (866) 516-1222 for further assistance.
Average Repair Cost for “AC Fan Running But Not Cooling” Issue in San Diego, CA
Most repairs for AC fan running but not cooling in San Diego, CA will range from a minimum of $75 to upwards of $250, depending on the complexity of the job and the parts required.
Common repair parts that may need replacement include the condenser motor, compressor, fan switch, thermostat, or coils. Prices will vary based on the cost of materials, the brand, and the type of equipment.
It’s important to contact a reliable appliance repair technician for accurate estimates. They will be able to investigate the problem and provide an accurate diagnosis for the best repair solution and cost.
For the best professional advice on AC fan running but not cooling repair cost in San Diego, CA, contact Local Reliable Appliance Repair at 866-516-1222
To minimize repair costs, it’s advised to routinely perform maintenance on your air conditioner, like regularly cleaning the coils and replacing the air filter. Consider investing in a service program such as a routine tune-up or Heat & Cool repair program. Doing this can help catch an issue before it becomes serious and costly to repair.
Overall, repair costs for AC fan running but not cooling issue in San Diego, CA will depend on the complexity of the job and the parts needed, as well as the cost of materials. It is best to contact a reliable appliance repair technician for the most accurate diagnosis and repair cost estimate. To keep repair costs to a minimum, regular maintenance and a service program is advised.
If your AC fan is running but not cooling, it’s time to call in the professionals. Reliable Appliance Repair in San Diego is the go-to HVAC and appliance repair company. A family-owned business, they provide same-day emergency service, friendly technicians, and unbeatable prices.
This locally trusted HVAC and appliance repair team is brimming with experienced technicians who can diagnose and repair the root of your AC fan’s problems. With a minimum of 5 years in the HVAC repair business, they offer affordable and honest pricing. Plus, they are fully licensed and insured, so you can rest assured that your home is properly taken care of.
For prompt and reliable AC fan repair, look no further than Reliable Appliance Repair. Call now at (866) 516-1222 and get same-day service with a smile! With their extensive knowledge and unbeatable prices, this San Diego gem is your go-to for all your HVAC and appliance repair needs. Don’t wait any longer; get your AC fan running again today with Reliable Appliance Repair!
FAQ: AC Fan Running But Not Cooling?
Q: What causes AC fan to run but not cool?
A: Numerous problems could cause an AC fan to run but not cool, such as clogged air filters, damaged compressor, refrigerant leaks, incorrect thermostat settings, faulty relays or fan motors, and blocked vents.
Q: What are the signs of an AC fan running but not cooling?
A: Homeowners may observe poor cooling, no cooling, a decrease in airflow, warm air coming through the vents, and frequently cycling AC units.
Q: What can homeowners do if their AC fan is running but not cooling?
A: Generally, homeowners can inspect air filters, check for refrigerant leaks, ensure the thermostat is set properly, and look for blocked vents on their own.
Q: When should I call a professional for help with my AC fan running but not cooling?
A: If homeowners are still experiencing problems with their AC unit, or if they are unfamiliar with the inner workings, it’s best to call a professional appliance repair service for help.
Q: Who should I call to help me with my AC fan running but not cooling?
A: For reliable, professional appliance repair service, contact Local Reliable Appliance Repair at (866) 516-1222.