AC Not Blowing But Not Tripping Breaker: What’s Going On?
Hey there, folks! It’s your HVAC buddies at Reliable Appliance & HVAC here! Today, we’re going to talk about a common issue many customers like you face: the AC not blowing but not tripping breaker.
One of our recent customers, Sandy Wilson, from sunny California, had this exact problem with her central AC from Major Central AC. When she called us, Sandy said she could hear the humming from the unit, but no air was coming out of the vents.
Our technician quickly arrived at Sandy’s single-family home to check out what was going on with her AC. To run diagnostics, the technician first checked whether the thermostat was set correctly – and it was. Then they went to the electrical panel and found that the AC breaker had not tripped. After that, we checked the air filter, and it was clean. So, what was the problem?
After doing some more digging, we discovered that the AC’s capacitor was defective. The capacitor is a cylindrical part that sends a charge to the motor to start the fan moving. Without it, the fan cannot run, and no air will flow through the vents. In Sandy’s case, the capacitor was providing enough power to hum but not enough power to get the motor and fan going.
Our technician gave Sandy a quote, so she knew exactly what she was paying for. It included the parts, materials, and labor costs. Check out the table below for a detailed breakdown of the costs:
| Parts | Material | Labor |
|---|---|---|
| Capacitor – $60 | Voltage meter – $30 | 1 hour labor rate – $100 |
After Sandy approved the quote, our technician replaced the capacitor, and she had cold air flowing through her vents once again.
Now, we get it – HVAC issues can be frustrating and complicated, but don’t worry! That’s what we’re here for. When you call Reliable Appliance & HVAC, we’ll send our technicians out to address the problem quickly. And, just like in Sandy’s case, after checking out your system, we’ll give you a quote that includes the necessary parts, materials, and labor costs upfront so you’re never in the dark about what you’re paying for.
If you’re experiencing the same problem Sandy did with your AC not blowing but not tripping breaker, give us a call, and we’ll get it up and running efficiently as soon as possible.
Stay cool, folks!
Tips to Prevent AC Not Blowing But Not Tripping Breaker Issues
Have you ever experienced turning on your AC and found that it’s not blowing any air, but the circuit breaker didn’t trip? This can be a frustrating and uncomfortable situation, especially when you’re living in a place like San Diego, where AC is necessary almost all year round.
To avoid such an issue, we’ve gathered some recommendations from manufacturers, local appliance companies, and HVAC technicians that you can follow.
Perform Regular Maintenance
Prevention is better than cure. The best way to avoid AC not blowing but not tripping breaker issues is by performing regular maintenance on your AC. Experts suggest doing this at least once a year. During maintenance, an HVAC technician can spot and fix minor issues that can turn into more significant problems in the future, saving you from costly repairs.
Change Your Air Filters
One of the leading causes of AC not blowing but not tripping breaker issues is a dirty air filter. Over time, your AC’s air filter accumulates dust, dirt, and other debris. This build-up restricts the airflow of your AC, resulting in a lack of cold air coming out of your vents.
Changing your AC’s air filter every few months helps prevent this issue, letting your AC breathe properly and improving air quality, circulation, and energy efficiency.
Check Your Thermostat Settings
Sometimes, the issue of AC not blowing but not tripping breaker can stem from your thermostat settings. Double-checking your thermostat before calling a professional can save you time, energy, and money.
Ensure that your thermostat has proper settings, like the right temperature and fan setting, and that it’s functioning correctly. If battery-operated, replace the batteries frequently. If you’re unsure or don’t know how to check your thermostat, consult an expert.
Clean Your Air Ducts
Dirty air ducts can also affect your AC’s performance, limiting airflow, and causing it not to blow cold air. The accumulation of dirt, dust, and debris inside your ductwork significantly lowers the indoor air quality and causes your AC to work harder than it needs to.
Having your ductwork cleaned every few years ensures clear airflow; improve air quality, redistribute air evenly, and helps keep a consistent temperature inside the house.
Use An Expert
When you encounter AC not blowing but not tripping breaker issues, resist the urge to try and fix it yourself. Only a licensed and experienced HVAC technician should handle fixing your AC’s electrical parts or mechanical issues.
Contact your local appliance companies or HVAC technicians for assistance. Reliable Appliance & HVAC in San Diego provides professional and affordable services for all your HVAC needs, available at (866) 516-1222 for 24/7 assistance.
Conclusion
To avoid issues of AC not blowing but not tripping breaker, performing regular maintenance; changing filters; checking thermostat, cleaning ducts, and using experts are all recommended preventive steps. Practicing these steps regularly will keep your AC working efficiently and effectively, ensuring a comfortable, temperature-controlled home year-round.
How Much Does it Cost to Repair “AC not blowing but not tripping breaker” Issue?
As the summer months approach, the last thing you want is a malfunctioning air conditioning system. Unfortunately, if you’re experiencing an “AC not blowing but not tripping breaker” issue, it’s a clear indication of a problem. Before you panic, take a deep breath, and read on.
At Reliable Appliance & HVAC, we’ve seen this issue countless times. In our experience, the cost of repairing or installing an AC unit will depend on several factors, including the type of AC, the brand, and the location. Here’s an itemized list of the main parts and materials you may need to fix the AC not blowing issue:
- Capacitor: $150-$400
- Thermostat: $100-$300
- Blower Motor: $300-$600
- Condenser Fan Motor: $450-$750
- Circuit Board: $200-$600
- Refrigerant Charge: $150-$300
These are the main costs you may incur when repairing or installing an AC unit. Keep in mind that these are suggested price ranges, and the actual cost of repair will depend on your specific situation.
If your issue is simple, such as a capacitor needing replacement, the repair will likely cost $300-$700. On the other hand, if the problem is more complex, like a faulty blower motor, expect to pay upwards of $800-$1500.
However, Reliable Appliance & HVAC always recommends calling us to provide you with a comprehensive quote. Our technicians offer a free consultation, where they’ll diagnose the issue and provide you with a full quote.
In San Diego, the prices are relatively higher due to various factors such as the location, the cost of living, and the competition. Given the current state of the market, the prices have gone up by roughly 20% since last year. Therefore, it’s essential to get an accurate quote from the experts at Reliable Appliance & HVAC to avoid any surprises.
In conclusion, if you’re experiencing an “AC not blowing but not tripping breaker” issue, don’t hesitate to call Reliable Appliance & HVAC at (866) 516-1222. We’ll dispatch one of our technicians to examine the issue and give you an accurate estimate. Don’t suffer from the scorching heat this summer – let Reliable Appliance & HVAC keep you cool and comfortable.
AC Not Blowing but Not Tripping Breaker: Reliable Appliance & HVAC to the Rescue!
Are you feeling frustrated because your AC is not blowing but not tripping the breaker either? Is it getting hotter and hotter by the minute, and you don’t know what to do? Don’t worry; Reliable Appliance & HVAC, a family-owned company located in San Diego, is at your service!
A Local Company That Cares
Reliable Appliance & HVAC is a local San Diego vendor company that takes pride in providing quality services to the community. With highly trained technicians with a minimum of 5 years of experience on the field, we can handle any AC problem you may be experiencing. Our company is licensed and insured, and we offer same-day services for your convenience.
Same-Day Service and Affordable Pricing
Don’t suffer through the heat any longer! Our technicians can perform same-day repairs or installations on your AC unit. One of our satisfied customers called us because her AC was blowing warm air, but it also wasn’t tripping the breaker. Our technician arrived quickly, and after running a diagnostic, he determined that the capacitor had failed. He offered the customer a fair and affordable quote, and she agreed to our services. In no time, her AC was working like new again!
Fair and Affordable Pricing
At Reliable Appliance & HVAC, we believe in fair and affordable pricing. We know that dealing with unexpected AC issues can be stressful, which is why we offer upfront pricing and provide detailed cost analysis for all repairs. We use brand-specific parts and follow the factory recommendations to ensure that your AC works efficiently and effectively.
The Benefits of Choosing Reliable Appliance & HVAC
- Quick, same-day service
- Highly trained technicians
- Fair and affordable pricing
- Upfront pricing and detailed cost analysis for all repairs
- Brand-specific parts and use of factory recommendations
- Licensed and insured with a 90-day warranty on all repairs
- $25 off repair costs for first-time customers
So if you’re experiencing issues with your AC not blowing but not tripping the breaker, don’t hesitate to call Reliable Appliance & HVAC. Our friendly staff will be happy to schedule an appointment for you and help you get your AC working properly again. Keep cool, San Diego!
FAQ: AC not Blowing but Not Tripping Breaker – What to Check
Q1: Why is my AC not blowing but not tripping breaker?
If your AC is not blowing but not tripping the breaker, it could be due to a variety of reasons, including a faulty thermostat, a clogged air filter, a damaged blower motor or capacitor, low refrigerant levels, or malfunctioning electrical components.
Q2: How can I check if my thermostat is faulty?
Try setting the thermostat to a temperature that’s lower than the current room temperature. If the AC doesn’t start blowing air, it’s likely that there’s a problem with the thermostat. Check the wiring and replace the thermostat if needed.
Q3: What should I do if the air filter is dirty?
Dirty air filters can restrict airflow and affect the cooling performance of your AC. Replace the air filter if it’s dirty and clean the air vents to ensure uninterrupted air flow.
Q4: How do I know if there’s a problem with the blower motor or capacitor?
If the AC unit hums or makes strange noises but doesn’t blow air, it could be due to a faulty blower motor or capacitor. Contact a reliable HVAC company like Reliable Appliance & HVAC to diagnose and repair the problem.
Q5: Can low refrigerant levels cause the AC to stop blowing?
Yes, low refrigerant levels can cause the AC system to stop blowing air. A refrigerant leak is a serious issue that requires immediate attention, as it can lead to compressor failure and extensive repairs.
Q6: When should I call a professional for help?
It’s best to call a professional HVAC company like Reliable Appliance & HVAC if you’ve checked the thermostat, air filter, and electrical components but the AC still doesn’t start blowing air. Our technicians will conduct a comprehensive diagnosis and provide you with an affordable solution.
For any AC-related issues, trust Local Reliable Appliance Repair at (866) 516-1222 to provide reliable and affordable services.