Troubleshooting Guide: What to Do When Your Heater Isn't Blowing Air
If your heater or furnace isn't working as it should or refuse to start, you should read this guide and learn how you can troubleshoot it and resolve the problem. Nothing can be more frustrating than trying to get warm in a chilly room, so we'll explain the most common causes of failure and how to address them.
Check the Thermostat
The first step in troubleshooting your heater is to check if the thermostat is correctly set. Often, people will forget to adjust the thermostat, leading to the heater not turning on. Ensure that the thermostat is set to the right temperature and that the fan control switch is in the “Auto” position.
Air Filter Clogged
The second thing to check is the air filter. A clogged or blocked filter can prevent heat from being circulated around the house. The filter should be replaced every few months, depending on the present conditions. If the filter is extremely clogged, it may need to be replaced more often.
Check the Circuit Breaker
If the thermostat and air filter are checked and “OK”, the next step is to check the circuit breaker for the heater. The circuit may have tripped due to a power surge, or it may have shorted out due to a problem with the wiring. Reset the breaker and see if that helps.
Out of Fuel
In some cases, the heater may simply be out of fuel. This may happen if you’ve just moved into a house with an existing heater, or if you are running a fuel-operated heater such as oil or gas. Check the fuel supply, and replenish it if necessary.
Furnace Check
If the above steps fail, it may be time to check the furnace. Check the pressure switch and the pilot light, and check that all the wires are connected. If you’re unable to troubleshoot the furnace on your own, it’s best to call a local appliance repair service to help you out.
Safety First
Before attempting any of the above steps, make sure that you have switched off power to the heater/furnace. Make sure the area around the heater is safe and you are comfortable with the process. It’s usually best to consult a professional before attempting to repair or replace a heater or furnace.
Conclusion
Having a heater not blowing air can be a real problem during colder seasons. Fortunately, there are some simple troubleshooting steps you can take to identify the cause, and possibly fix it. If none of the troubleshooting steps described above resolve the issue, you’ll need to contact a local appliance repair service. They will be able to assess the issue and recommend a solution. If you wish to read more information about Heater Not Blowing Air, click here. For the fastest, most reliable appliance repair services, call Local Reliable Appliance Repair at (866) 516-1222.
Heater Not Blowing Air: Solutions and Best Practices
In San Diego, it is recommended to take preventive action to avoid issues with a heater not blowing air. The following solutions and best practices should be utilized to ensure any potential heater problems are avoided.
Solutions:
– Check the filter on the heater unit to make sure it is clean. A dirty filter will reduce airflow and cause the heater to not blow air during operation.
– If the problem is still not resolved after checking the filter, it is recommended to call a local HVAC technician to inspect and diagnose the problem.
– It may be necessary to replace the air filter of the unit if it is very dirty or worn out.
– Check the thermostat setting to ensure the system is in either heat or cool mode.
– Check that the fan switch and blower motor are working correctly and have not become damaged or worn out.
Best Practices:
– Change the air filter on the heater regularly. Depending on the type and brand of the heater, the air filter should be changed every three months to once a year.
– Have the HVAC system serviced regularly. Precautionary maintenance should be done once a year by a professional to ensure the unit is running properly.
– Schedule HVAC appointments during the summer. Summer is usually the busiest season for HVAC technicians, so scheduling maintenance appointments ahead of time is advisable.
– Install the correct size air filter for the system. A filter too small may not be able to adequately filter the air, causing airflow problems and reducing heating efficiency.
– Use a surge protector for the system. A surge protector will protect the system from potentially damaging power peaks and surges.
– Check for any blocked or closed vents. Making sure all air supply vents are unblocked and open will help promote proper air flow.
Average Cost for Fixing a Heater that Isn't Blowing Air in San Diego
Facing unseasonably cold weather and faulty heating systems? Local Reliable Appliance provides dependable appliance repair services in San Diego, and can help when a heater isn't blowing air. The average repair and installation cost will depend on the severity of the issue. Here's all the information needed to understand the cost and required parts, as well as why calling Local Reliable Appliance at tel:(866) 516-1222 is the best choice.
The minimum repair cost in San Diego is typically around $50-$100, while the complex repair and installation cost can range between $300-$1,000. The most commonly replaced parts include a heating element which costs around $100, a thermostat which costs around $200, a filter which costs around $20 and a blower motor which costs around $30 minimum.
More extensive repairs or replacements, such as the heater unit, can cost up to $1,000 depending on the size of the unit, its age, and its brand. For any parts or supplies, you might also need to factor in the cost of materials.
It is recommended to call a professional HVAC contractor for such repairs, as addressing any heating problems involves working with high voltages which can be highly dangerous. An experienced technician like Local Reliable Appliance can quickly diagnose any underlying problem and provide the most cost-effective solutions.
Get in touch with Local Reliable Appliance at tel:(866) 516-1222 to assist with Heater Not Blowing Air issue in San Diego. With years of industry expertise and customer satisfaction rates, you can expect the most outstanding quality of service available.
When Your Heater Stops Blowing Air: Call Reliable for Repair
When your heater won't blow air, you must act fast before things turn from bad to worse and you end up with a more costly problem down the line. That's why it pays to know a respected and reliable HVAC and appliance repair company to call for help.
Reliable Appliance and HVAC Repair is a family-owned repair shop in San Diego, CA. They offer same-day service and repairs, no matter the size or complexity of the job. Plus, they have a team of highly-trained technicians with a minimum of five years of experience in the field.
Reliable not only offers fair and affordable pricing, but they care about customer satisfaction and winning their trust. That's why they are licensed and insured and make sure to provide quality workmanship with each visit.
Reliable will work fast and get the job done right the first time. As a first-time customer with Reliable, feel free to ask for a $25 discount on labor.
If your heater won't blow air, don't waste time trying to do it yourself. Save yourself time, money, and possible danger. Call the folks at Reliable Appliance Repair at (866) 516-1222 for fast and reliable HVAC and appliance repair.
FAQ – Troubleshooting Guide: What to Do When Your Heater Isn't Blowing Air
Why isn't my heater blowing air?
The cause of a heater not blowing air can vary. Issues may include power shortage, thermostat, broken fan or faulty blower components.
How do I know my heater isn't working?
Inadequate air flow from vents is one sign of a malfunctioning heater. Additionally, some heaters make a strange noise when failing to produce hot air.
What should I do if my heater won't turn on?
If your heater won't turn on, first make sure the thermostat is set properly and power is connected. If it still won’t turn on, inspect the a/c power cord and condensate switch.
What causes the fan motor to fail?
The motor can fail due to electrical issues, clogged filters, and excess dust. The motor can also wear out over time due to normal wear and tear.
How do I know if my heater needs repair?
Frequent cycling, insufficient heat, odd smells and noises may be a sign your heater needs repair.
When should I call for service?
If you don't feel comfortable fixing the heater on your own, call a reliable appliance repair company.
If you're experiencing any of the issues above or other heater troubles, contact Local Reliable Appliance Repair at (866) 516-1222.