Samsung Washing Machine Error Codes and Solutions

With the ever-evolving technology used in Samsung washing machines, it's no surprise that a few kinks in the system may arise occasionally. One of the most common issues Samsung washing machine owners diagnose are error codes. Owners of Samsung Washing Machines may experience these errors more frequently than others, but luckily, there are a few troubleshooting methods to use before reaching out to an appliance repair expert. Let’s take a look at some of the most common Samsung washing machine error codes and how to fix them.

3E Error Code

The 3E error code on Samsung washing machines simply indicates that there is a problem with the water supply to the machine. First, check the water pressure of your tap—it should measure at least 686.4 kPa for proper function. If the water pressure is low, turn up the tap. If it’s still low, you’ll need to call the local utility company.

Next, if you have a separate hot and cold water faucet, it’s important to make sure both are open. If that is the case and the water pressure is still low, there could be a malfunction in the pressure switch. This could cause a 3E error to be flagged.

4E Error Code

The 4E error on Samsung washers is usually caused by a problem with the water supply. This can usually be attributed to low water pressure or even clogged water valves.

First, try unplugging the washing machine and checking all of the water valves on the back. Make sure they’re all open. Next, check the water pressure on the tap and make sure it’s at least 686.4 kPa. If the water pressure is too low, turn up the tap and try washing again.

If that doesn’t work, try cleaning the inlet filters. This can be done by unscrewing them from the back of the washing machine and cleaning the inside with a wet cloth. Once you’ve cleaned the filters, plug your machine back in and try washing again.

SE Error Code

The SE error code indicates a problem with the motor of the washing machine. If you see this code, you should immediately unplug the machine and call a Samsung appliance repair technician to diagnose the issue. It could be a problem with the wiring or circuitry that could cause more harm if not handled by a professional.

If the error code persists after the repair, there could be a deeper issue with the motor itself. The technician may suggest replacing the motor, as it could be that the original motor has failed.

DC Error Code

The DC error means the drum of the washing machine is not spinning. This is usually because the drum is jammed or there is not enough weight in the drum. Check the drum to make sure nothing is blocking it and remove anything that is.

Next, check to make sure that the load of clothes is evenly distributed in the drum. The washing machine should be at least ¼ of the way full for it to spin properly. Also make sure you’re using a HE or low-sudsing detergent, as regular detergent can cause the drum to jam.

OE Error Code

An OE error code means that the washing machine is not draining properly. This could be because the drain pump is clogged or the hoses are not attached properly. First, unplug your machine and check the drain filter and make sure it’s not clogged. If it’s clogged, remove the clog.

Next, make sure the drain hose is properly connected and that the water pressure is high enough. If it isn’t, turn up the tap and try washing again. If you’re still seeing the OE error code, contact a Samsung appliance repair expert to diagnose the issue.

While error codes can be a hassle, they can also be fixed quickly and easily if you know what to do. Knowing the different codes and why they occur make it much easier to diagnose and fix the problem. If you’re still seeing the error code after trying the steps above, it’s always a good idea to contact a local appliance repair technician to diagnose the issue. If you wish to read more information about Samsung error codes, click here. Also, for a reliable appliance repair call Local Reliable Appliance Repair at tel:(866) 516-1222 or visit Samsung error codes.

Samsung Error Codes: Advice to Follow to Avoid Issues

Before taking on any repairs yourself, it's important to contact a trained and reputable local appliance or HVAC technician. Manufacturer recommendations suggest proactive maintenance to prevent Samsung error codes from occurring.

Below are key preventive measures to take:

Regularly check wiring and connections

• Make sure that all wiring and connections are secure and visible.
• Inspect the wires in your appliance for any discoloration or fraying that might indicate a possible short or malfunction.
• Ensure that any exposed wiring is secured and protected, preferably with insulated tubing.

Check your appliance for any traces of liquid or debris

• Clean any liquid leaks and/or debris accumulation.
• Clean the condenser coils, including the surrounding area.
• Vacuum the condenser to effectively remove any dirt that may have accumulated over time.

Inspect the refrigerant lines, if possible

• Measure the pressure in both the suction and the discharge lines.
• Look for any signs of damage on the refrigerant lines and the compressor.
• Inspect the thermostat and other components of the cooling system.

Conduct regular maintenance to address any performance issues

• Replace malfunctioning parts and components.
• Perform necessary compressor and condenser maintenance, including replacing it if necessary.
• Clean the evaporator coils to improve its efficiency.

Perform regular inspections

• Inspect your appliance for any issues on a regular basis.
• If a Samsung error code appears, contact a reliable local appliance repair service immediately.
• A professional technician can identify and fix the underlying problem before it becomes a more serious issue.

By taking proactive preventive measures and regular maintenance, you can avoid Samsung error code issues and keep your appliance running optimally. To ensure the best results, contact a local and reputable appliance or HVAC technician to inspect and repair your appliance. Looking for a reliable technician? Consider Local Reliable Appliance Repair at (866) 516-1222.

Average Repair Cost for "Samsung Error Codes"

For the average repair cost for Samsung error codes issue in San Diego, it is recommended to contact Local Reliable Appliance Repair for reliable and cost-effective solutions.

The repair cost of any Samsung error code issue will depend on the complexity of the problem, the replacement parts required and the labor charges. The minimum repair or installation cost for a straightforward issue like a broken belt or valve, can range from $50 to $150. However, complex repair or installation could cost between $200 and $400 or more.

The most commonly replaced parts are:

• Belt
• Valve
• Plug
• Motor
• Wiring
• Hose
• Heating Element

Labor costs will depend on the complexity of the repair, amount of time required and the requested technician's experience. Materials cost may vary depending on the item/part needed and availability.

It is recommended to contact Local Reliable Appliance Repair for a detailed estimate on the most suitable repair cost for your particular issue.

Solving Samsung Error Codes Easily With Reliable Appliance Repair

Samsung devices are known to be of superior quality, but there may come a time when they display error codes that the user isn't able to solve. In such a situation, it's beneficial to call in the help of an experienced repair company like Reliable Appliance Repair.

Located in San Diego and family-owned, Reliable offers same-day services for appliance and HVAC repair and installations. As a first-time customer, you can avail of $25 off labor additionally.

The team at Reliable is highly trained and consists of technicians with a minimum of 5 years experience in the field – plenty of experience to deal with Samsung error codes. Reliable offers fair and affordable pricing and is licensed and insured, so you can trust that your device will be fixed efficiently and reliably.

If you ever encounter a problem with your Samsung device that you need help with, make sure to call Reliable Appliance Repair first. You can reach them at (866) 516-1222, and experience their dependability firsthand. Availability, affordability, and excellent customer service, these are the reasons to choose Reliable Appliance Repair.

FAQ: Samsung Washing Machine Error Codes and Solutions

What are common Samsung washing machine error codes?

Common Samsung washing machine error codes include CE (communications), dE (door), dL (door latch), 4E (water), and HE (heater).

What does 4E mean on a Samsung washing machine?

The 4E error code on a Samsung washing machine indicates a water supply issue. The issue may be due to a clogged water filter, low water pressure, or a leak in the hose or water-inlet valve.

What does the dL error code mean on a Samsung washing machine?

The dL error code on a Samsung washing machine indicates a door latch issue. This is likely due to a defective latch, blocked latch, or misalignment of the drum or door-lock switch.

What does HE mean on a Samsung washing machine?

The HE error code on a Samsung washing machine indicates a heater issue. This is likely due to blocked drains, defective heaters, or a faulty PCB.

What should I do if my Samsung washing machine is displaying an error code?

If your Samsung washing machine is displaying an error code, you should unplug the appliance and try to reset the machine by pressing the "Power/Cancel" button for 5 seconds. If the error persists, then it is best to contact a qualified repair service.

For any other repair needs or questions, please call Local Reliable Appliance Repair at tel:(866) 516-1222.